STUDY OF THE PHENOMENON OF SURGE BY IMPROVING THE DESIGN OF A TURBOCHARGER TEST RIG

Authors

Name Affiliation
Beibit Kaliyev

Non-profit limited company «Akhmet Baitursynuly Kostanay Regional University»

Zhumash Bekmyrza

Akhmet Baitursynov Kostanay Regional University

Tatyana Bedych

Kostanay Engineering and Economics University named after M.Dulatov

Riza Gabdysalyk

D. Serikbayev East Kazakhstan Technical University

Samat Baigereyev

East KazakhstanTechnical University named after D. Serikbaev

Pages:

68-79

Views:

11

Keywords:

surge, bearings, turbocharging, turbocharger, valve, resonance, frequency, coasting

Abstract

Surge is an unstable compressor operating mode characterized by sudden pressure surges and uneven air or gas delivery. This occurs when the pressure difference between the compressor inlet and outlet becomes too great. In turbocharged engines, this is often due to changing loads during operation, which disrupts the normal operation of the turbocharger pump and turbine wheels. A series of measures to improve the turbocharger test rig's design focused on simulating real-world operating conditions and determining the limits of surge phenomena. The studies were conducted using the Polytec CLV-3D measuring system. To record vibration characteristics, special ring elements were installed on the turbine shaft, pressed against the disk, through which vibrations were excited. The experimental results obtained confirmed the reproducibility of the method and allowed us to establish the correspondence of each identified mode to specific natural vibration frequencies. It is advisable to exclude the detected frequency ranges from the permissible operating conditions. The implementation of this approach is aimed at increasing the reliability and durability of the turbocharger by preventing operation in the surge zone.

References

  1. Ханин Н.С., Аболтин Э.В., Лямцев Б.Ф., Зайченко Е.Н., & Аршинов Л.С. (1991). Автомобильные двигатели с турбонаддувом: учебник для вузов. Машиностроение. // Khanin, N.S., Aboltin, E.V., Lyamtsev, B.F., Zaichenko, E.N., & Arshinov, L.S. (1991). Avtomobil'nye dvigateli s turbonadduvom [Automobile engines with turbocharging]. Mashinostroenie. (In Russ.)
  2. Zadorozhnaya, E.A. (2015). Solving a thermohydrodynamic lubrication problem for complex-loaded sliding bearings with allowance for rheological behavior of lubricating fluid. Journal of Machinery Manufacture and Reliability, 44(1), 46–56.
  3. Плаксин А.М. и др. (2014). Повышение надежности турбокомпрессоров автотракторной техники применением гидроаккумулятора. Вестник Красноярского государственного аграрного университета, 8, 176–180 // Plaksin, A.M., et al. (2014). Povyshenie nadezhnosti turbokompressorov avtotraktornoy tekhniki primeneniem gidroakkumulyatora [Improving the reliability of turbochargers of automotive and tractor equipment using a hydraulic accumulator]. Vestnik Krasnoyarskogo gosudarstvennogo agrarnogo universiteta [Bulletin of Krasnoyarsk State Agrarian University], 8, 176–180. (In Russ.)
  4. Игнатьев А.Г., Гриценко А.В., Бурцев А.Ю., Глемба К.В., Карпенко А.Г., & Руднев В.В. (2017a). Исследование помпажа турбокомпрессора в режимах его торможения регулируемой заслонкой. Фундаментальные исследования, 10–2, 222–227. // Ignat'ev, A.G., Gritsenko, A.V., Burtsev, A.Yu., Glemba, K.V., Karpenko, A.G., & Rudnev, V.V. (2017a). Issledovanie pompazha turbokompressora v rezhimakh ego tormozheniya reguliruemoy zaslonkoy [Study of turbocharger surge in braking modes using an adjustable damper]. Fundamental'nye issledovaniya [Fundamental Research], 10–2, 222–227. (In Russ.)
  5. Плаксин А. М. и др. (2015a). Продление срока службы турбокомпрессоров автотракторной техники применением гидроаккумулятора в системе смазки. Фундаментальные исследования, 6–4, 728–732. // Plaksin, A. M., et al. (2015a). Prodlenie sroka sluzhby turbokompressorov avtotraktornoy tekhniki primeneniem gidroakkumulyatora v sisteme smazki [Extending the service life of turbochargers of automotive and tractor equipment using a hydraulic accumulator in the lubrication system]. Fundamental'nye issledovaniya [Fundamental Research], 6–4, 728–732. (In Russ.)
  6. Гимадиев А.Г. и др. (1998). Снижение виброакустических нагрузок в гидромеханических системах. В.П. Шорин & Е.В. Шахматов (ред.). СГАУ // Gimadiev, A.G., et al. (1998). Snizhenie vibroakusticheskikh nagruzok v gidromekhanicheskikh sistemakh [Reduction of vibroacoustic loads in hydromechanical systems]. V.P. Shorin & E.V. Shakhmatov (Eds.). SGAU. (In Russ.)
  7. Калиев Б.К., Исинтаев Т.И., Гриценко А.В., & Бурцев А.Ю. (2019). Анализ отказов систем наддува автотракторных ДВС. В Байтурсыновские чтения 2019: материалы Международной научно-практической конференции «Многогранность великой степи: духовное возрождение, знание и инновации» (с. 415–420) // Kaliev, B. K., Isintaev, T. I., Gritsenko, A. V., & Burtsev, A. Yu. (2019). Analiz otkazov sistem nadduva avtotraktornykh DVS [Failure analysis of boost systems of automotive and tractor internal combustion engines]. In Baitursynovskie chteniya 2019: materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii “Mnogogrannost' velikoy stepi: dukhovnoe vozrozhdenie, znanie i innovatsii” [Baitursynov Readings 2019: Proceedings of the International Scientific and Practical Conference “The Versatility of the Great Steppe: Spiritual Revival, Knowledge and Innovations”] (pp. 415–420). (In Russ.)
  8. Кабанов О.В., & Грыжебовский А.О. (2016). Современные тенденции противопомпажной защиты компрессорного оборудования. Актуальные проблемы современной науки, 2(87), 266–269 // Kabanov, O.V., & Gryzhebovskiy, A.O. (2016). Sovremennye tendentsii protivopompazhnoy zashchity kompressornogo oborudovaniya [Modern trends in anti-surge protection of compressor equipment]. Aktual'nye problemy sovremennoy nauki [Current Problems of Modern Science], 2(87), 266–269. (In Russ.)
  9. Игнатьев А.Г., Гриценко А.В., & Бурцев А.Ю. (2017b). Исследование помпажа турбокомпрессоров. АПК России, 24(4), 985–989 // Ignat'ev, A.G., Gritsenko, A.V., & Burtsev, A.Yu. (2017b). Issledovanie pompazha turbokompressorov [Study of turbocharger surge]. APK Rossii [Agro-Industrial Complex of Russia], 24(4), 985–989. (In Russ.)
  10. Плаксин А.М., Гриценко А.В., Бурцев А.Ю., & Глемба К.В. (2015b). Способ обеспечения работоспособности турбокомпрессора дизелей с применением автономного смазочно-тормозного устройства. Вестник Красноярского государственного аграрного университета, 5, 89–94. // Plaksin, A.M., Gritsenko, A.V., Burtsev, A.Yu., & Glemba, K.V. (2015b). Sposob obespecheniya rabotosposobnosti turbokompressora dizeley s primeneniem avtonomnogo smazochno-tormoznogo ustroystva [A method for ensuring the operability of diesel turbochargers using an autonomous lubrication and braking device]. Vestnik Krasnoyarskogo gosudarstvennogo agrarnogo universiteta [Bulletin of Krasnoyarsk State Agrarian University], 5, 89–94. (In Russ.)
  11. CLV-3D Compact 3-D Laser Vibrometer for simultaneous 3-D measurement of dynamics. (n.d.). https://em.susu.ru/wp-content/uploads/2017/01/Polytec-CLV-3D-3220.pdf
  12. Хадиев М.Б., Зиннатуллин Н.Х., & Нафиков И.М. (2014). Механизм помпажа в центробежных компрессорах. Вестник Казанского технологического университета, 17(8), 262–266. // Khadiev, M.B., Zinnatullin, N.Kh., & Nafikov, I.M. (2014). Mekhanizm pompazha v tsentrobezhnykh kompressorakh [Mechanism of surge in centrifugal compressors]. Vestnik Kazanskogo tekhnologicheskogo universiteta [Bulletin of Kazan Technological University], 17(8), 262–266. (In Russ.)
  13. Gritsenko, A., Plaksin, A., & Shepelev, V. (2017). Studying lubrication system of turbocompressor rotor with integrated electronic control. Procedia Engineering, 206, 611–616. https://www.sciencedirect.com/science/article/pii/S1877705817352104
Kaliyev, B., Bekmyrza, Zh., Bedych, Т., Gabdysalyk, R., & Baigereyev, S. (2026). STUDY OF THE PHENOMENON OF SURGE BY IMPROVING THE DESIGN OF A TURBOCHARGER TEST RIG. EKTU Journal of Engineering Sciences, 1(2), 68-79. https://doi.org/10.51885/3134-8009_JES_2026_2_5